Can anyone that knows give pro and con information on useing pure titainium as one can get to use as plates in a cell ? (pure titainium is easyer to machine than alloys espeshially if it has aluminum in it ,,,springy,,,) thanks joesflashdog

Views: 258

Reply to This

Replies to This Discussion

Pure titanium can only use as the cathode it do help to minimize the creation of Hex. chromium. However not as the anode it was because when we apply current to the anode + it for oxygen production ;The titanium plates were immediate create a thin layer of titanium oxide layer due to oxidization by electrolysis.This thin layer of titanium oxide block the current go through .
That makes sense. The oxidation is greatest where the oxygen is - on the anode.

Welcome HydroxygasDrycell :-)
Try to fail and not fail to try,I personally try to use titanium on anode.It block current!The titanium oxide block current. The amp drop to nun immediate few seconds after it start.And not much information discuss about this.At the end of the day I use Super Alloy Ni201 as the anode and Neutral plates and the Gr 1 Pure Titanium was use on cathode .The Ni 201 is far too expensive than the titanium and it about 10x more expensive than SS.
Titanium Gr.1 as per ASTM B 265 is the best grade of electrochemical application. It is 99.99% pure titanium & having very good machining and weldable characters.

Regards.,
Velappan Jeyakumar

Reply to Discussion

RSS

*** Translate HODINFO ***

Latest Activity

Jediah Krajcik updated their profile
Thursday
Aaron Malczewski replied to DAN MERRICK's discussion 'hhhn vs hho'
Thursday
Wade Waters replied to Felix Audet's discussion 'Resonnance electrolysis VS HV flyback'
Aug 15
Jediah Krajcik is now a member of HODINFO
Aug 9
charles ware replied to charles ware's discussion 'Popular mechanics story on HHO'
Aug 2
Richard Keough updated their profile
Jul 31
Profile IconKiera and Clare Katz joined HODINFO
Jul 31
broandrew replied to charles ware's discussion 'Popular mechanics story on HHO'
Jul 30
Alan Smith replied to gabet123's discussion 'Harlo Mayne and Maynex'
Jul 25
gabet123 posted a discussion
Jul 25
gabet123 commented on David Brightman's status
Jul 24
Stuart Kinley joined James Morehead's group
Jul 23
David Brightman commented on David Brightman's status
Jul 22
gabet123 commented on David Brightman's status
Jul 22
David Brightman posted a status
". enough clearance between the electrodes as I cell I found a fine slurry of cast iron had bridged the regards Dave"
Jul 21
Heidi Dayne Hanson is now a member of HODINFO
Jul 17

© 2018   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat