Views: 155

Reply to This

Replies to This Discussion

So does this work still?

Yes - this has been working REALLY well.  I am still using it.
It is even better when you mix water + methanol to produce mist.  Excellent at high engine RPM.

Now I am configuring to run my car on two devices:

1) HHO injection device using ACE Janitorial Ammonia    (316L SS tube with Platinum-coated wiremesh anode)

2) Water + methanol mist injection device.

Good stuff :)

I've tried this and noticed the mist production varied greatly with temperature, and it improved greatly when i started using distilled water..  

That's interesting.

I've looked at piezo water misters before but was put off by their relatively low hours life... well the ones I got hold of had a relatively short life.

How many hours do you expect from your transducers?

Felix Audet said:

I've tried this and noticed the mist production varied greatly with temperature, and it improved greatly when i started using distilled water..  

Suprisingly, the one I was using is the cheapest ones I could find on ebay, I bought for 4$ each and there still holding after a summer long of use.  Problem is mist production is very unconsistant. Usually it made very little fog when the water is cold and a decent production when the water was warm to the touch. I used 2 in parallel. 

Sounds like a study of optimum temp is needed. Then a circuit to keep it that way.

Mist production consistency is mostly based on water level relative to the depth of the mister ...not on water temp.  I bought several of this unit and one worked for almost a year of driving.

https://www.amazon.com/gp/product/B00PAK21WU/ref=oh_aui_search_deta...

The one I got is very similar to that.. 

I was thinking about getting a 6 disks unit, with the hope that it'll make more mist, more consistently..

Optimal temp seems to be in the 30 to 50 C range..

Reply to Discussion

RSS

*** Translate HODINFO ***

Latest Activity

Max Wilson posted a blog post
Jan 10
Max Wilson posted a blog post
Jan 7
Max Wilson posted a blog post
Jan 3
Bradley Glen posted a discussion
Jan 1
gabet123 replied to gabet123's discussion 'Spammer Alert'
Jan 1
Isao Haraguchi is now a member of HODINFO
Jan 1
Mike Walsh and Don Ingold are now friends
Dec 31, 2018
Max Wilson posted blog posts
Dec 27, 2018
Emil Mihaylov replied to gabet123's discussion 'Spammer Alert'
Dec 21, 2018
Bradley Glen replied to gabet123's discussion 'Spammer Alert'
Dec 21, 2018
Max Wilson posted a blog post
Dec 21, 2018
Alan Smith updated their profile
Dec 20, 2018
Max Wilson is now a member of HODINFO
Dec 20, 2018
Alberto Aschidamini posted a status
"Hydrogen app to control amps and fuel http://www.youtube.com/watch?v=EgdpAQ8MpfU"
Dec 17, 2018
Greg Kusiak replied to Dave Lynds's discussion 'O2 sensors'
Dec 8, 2018
Jim commented on Caprita Remus's blog post 'WHAT IS THE BEST HHO DRY CELL ? +NNNNN- ???? OR 4N2 ????'
Dec 5, 2018

© 2019   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat