Coating of molybdenum improves the efficiency of catalysts for producing hydrogen

Views: 135

Reply to This

Replies to This Discussion

Not only molybdenum, but silver, aluminium, or others  har metal than can reverberate and detourn the way of eletrons.
Hard metals cause eletrons chocking and causes more hydrogen generating than normal reactors. 

You can also develop a natural catalytic layer on the surface of the 316L ss on the H side in the platinum metal groups, this increases the quality and 4x's more powerful form of HHO gas. You must be in the magic Brown's gas area of 1.5v to 2.8v and no more voltage and must cleanse the cells before using.

Alum and titanium will both passivate and clog the pours and can not handle the harsh lye electrotype and becomes dioxides that make less and less gas. If you just stick with ss the gas quality goes up and the cell produces more gas later on! No moving of metals due to low voltage no heat is made and also the cell design ins sealed from each other cell. o avoid 12/14volt leakage. All from Bob Boyce's Catalytic H20 TechnologyHe can run the ICE engine off water alone, but told not to many. them. with his 1981 gag ordered patent. hydrogengarage.com

My friend, I developed a chemical that produces more HHO than NaOH and KOH together and does not cause skin lesions, can be placed on the tongue, can be disposed of without harm to the environment and produces with 1 to 5 amps, the same as other electrolytes produce at 15 amps. The only requirement is that the hydrogen reactor has the Boyce construction parameters mentioned by you and the voltage is between 1.5 to 2.0 volts.




broandrew said:

You can also develop a natural catalytic layer on the surface of the 316L ss on the H side in the platinum metal groups, this increases the quality and 4x's more powerful form of HHO gas. You must be in the magic Brown's gas area of 1.5v to 2.8v and no more voltage and must cleanse the cells before using.

Alum and titanium will both passivate and clog the pours and can not handle the harsh lye electrotype and becomes dioxides that make less and less gas. If you just stick with ss the gas quality goes up and the cell produces more gas later on! No moving of metals due to low voltage no heat is made and also the cell design ins sealed from each other cell. o avoid 12/14volt leakage. All from Bob Boyce's Catalytic H20 TechnologyHe can run the ICE engine off water alone, but told not to many. them. with his 1981 gag ordered patent. hydrogengarage.com

Reply to Discussion

RSS

*** Translate HODINFO ***

Latest Activity

Wayne Sanders is attending Ed Grimm's event

Ed Grimm at Clearwater, Florida

October 18, 2019 at 12pm to October 20, 2019 at 8pm
2 hours ago
Wayne Sanders replied to John Sensenig's discussion 'CR4 says HHO does not work. What should I tell them?'
12 hours ago
Profile IconHarry Grimme and chungculands joined HODINFO
Jul 13
cal bates is now a member of HODINFO
Jul 2
Dave Brightman replied to David Brightman's discussion 'ACE 2'
Jun 16
Bradley Glen posted a discussion
Jun 5
MrBill joined don's group
Jun 5
Profile Iconemile khoury and Erick Goodman joined HODINFO
Jun 5
Barry Holzsweig posted a discussion
May 29
Profile Iconoliver mortagne and Heman Kidd joined HODINFO
May 27
Profile IconCharlesblake and John wilson joined HODINFO
May 21
Profile IconJustin and Dick Bos joined HODINFO
May 1
Robert Sacra favorited gabet123's discussion Catalytic Carbon PR11 Press Release new concepts and ACE cell.
Apr 28
Dave Brightman replied to gabet123's discussion 'Catalytic Carbon PR11 Press Release new concepts and ACE cell.'
Apr 28
Jim Mitchell commented on Ed Grimm's event 'Ed Grimm'
Apr 28
Jim Mitchell is attending Ed Grimm's event

Ed Grimm at Clearwater, Florida

October 18, 2019 at 12pm to October 20, 2019 at 8pm
Apr 28

© 2019   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat