The International Open Source Hydrogen On Demand Builders Network.
HODINFO is a collaborative think tank. We are an International group comprised of inventors, scientist, mechanics, tinkerers, fabricators, and out of the box thinkers. Our mission is to find innovative solutions to the problems that primarily limit the production and delivery of H2. As the world wakes up to the idea of using hydrogen it also becomes clear that immense infrastructure initiatives will be required to make it happen. If adequate solutions can be found to support HOD systems then the world can remove great and costly limitations on future applications. It is important to realize that the future is not just Hydrogen, it's Hydrogen-on-Demand.
Hello All, Happy new year. I want to build a system to use with my Citroen C5 1.6 HDI. I have been given a Hydrotechnix DC-1204-30 Voltage to current converter that I would like to use to control the cell. The Specs are as follows:-
Input Voltage 10 - 15 Volts
Adjustable Output Current 28A - 32A DC (Nominal 30A)
Output Voltage 3.5V - 4.8V (Nominal 4V)
Current Ripple 5% (Maximium)
This unit I beleave is a constant current style pulse width modulator. This unit cannot be used with nutral plate generators ie: +nnn- , I have been in touch Hydrotechnix and they have suggested a 4 plate 2 cell configuration eg: +-|+- using 100mm square 2 mm thick 316 ss plates with a gap of 2mm between the plates. I would however prefer to use Titanium as it gives a better quality gas.
Any advice would be welcome please
It is the KOH that is in the gas that is cumulating in the bubbler.
Mark Vincent said:
PS have just taken my system off line after 10.5 hours still just running warm no steam.
Just one other question I have just emptied the bubbler of water should it feel slimy to the touch or have I got something wrong?
Thank You for the replies. I was looking a using titainium for the plates a one point but found it to expensive as I am unemployed at the moment.