i am looking to build a 25 plate dry cell to start, with a configuration of 3 negitive plates and 2 positive (-nnnnn+nnnnn-nnnnn+nnnnn-) the plates will have a working surface of 825sq" now i just need to know how to find the amperage and voltage for the best possible production of HHO

with a 1/16th gasket spacing it all.

now my problems are i do not know the exact amount of hho that i need for a 3.0 v6 150HP motor that is on my 2000 ford ranger. i am assuming 2-4 lpm to see large gains.

(I am also compleatly new to the HHO deal and i have done some reading on the subject but i am always looking for more info, if you guys can turn me too it that would be great.)

Views: 20

Replies to This Discussion

Hi Mike, I too am new to HHO and trying to learn. I saw a good set-up at Zero Fossil Fuels website. He give the configuration he uses for the cells he sells. His stuff looks good.
Dan
Hi Daniel
What is the link to Zero Fossil Fuels website
Thanks Mike H
Mike H said:
Hi Daniel
What is the link to Zero Fossil Fuels website
Thanks Mike H

Hey you dry cell guys come highly recommended
Quote
Mike - I suggest, I mean WE suggest you join the Dry Cell Group. There are good members there like Don and Gary and James Morehead who can give you designs and tips on how to make a dry cell. These people give valuable info for free because they're possessed by a sense of mission in their hearts. I'd dare say now that if not for people like them and more (there's Christer and Fozzy and Bob Ace too, etc., etc.,etc.), this site wouldn't have any success stories to tell.

Here's a partial design by Bill Williams. This also points out some youtube videos. But let me tell you: the HHOInfo design is more doable.

Does some one have a complete plan for a dry cell? Small, compact 4 cylinder. I can no longer work with my conventional old school cell, water gets to dirty to fast. Still don't understand the concept of a dry cell. Am I not still immersing the plates in water and KOH?
Thanks Mike
Mike I don't know the link but you cab google it. He has some info on the website somewhere

Mike H said:
Mike H said:
Hi Daniel
What is the link to Zero Fossil Fuels website
Thanks Mike H

Hey you dry cell guys come highly recommended
Quote
Mike - I suggest, I mean WE suggest you join the Dry Cell Group. There are good members there like Don and Gary and James Morehead who can give you designs and tips on how to make a dry cell. These people give valuable info for free because they're possessed by a sense of mission in their hearts. I'd dare say now that if not for people like them and more (there's Christer and Fozzy and Bob Ace too, etc., etc.,etc.), this site wouldn't have any success stories to tell.

Here's a partial design by Bill Williams. This also points out some youtube videos. But let me tell you: the HHOInfo design is more doable.

Does some one have a complete plan for a dry cell? Small, compact 4 cylinder. I can no longer work with my conventional old school cell, water gets to dirty to fast. Still don't understand the concept of a dry cell. Am I not still immersing the plates in water and KOH?
Thanks Mike

RSS

*** Translate HODINFO ***

Latest Activity

Wayne Sanders is attending Ed Grimm's event

Ed Grimm at Clearwater, Florida

October 18, 2019 at 12pm to October 20, 2019 at 8pm
1 hour ago
Wayne Sanders replied to John Sensenig's discussion 'CR4 says HHO does not work. What should I tell them?'
11 hours ago
Profile IconHarry Grimme and chungculands joined HODINFO
Jul 13
cal bates is now a member of HODINFO
Jul 2
Dave Brightman replied to David Brightman's discussion 'ACE 2'
Jun 16
Bradley Glen posted a discussion
Jun 5
MrBill joined don's group
Jun 5
Profile Iconemile khoury and Erick Goodman joined HODINFO
Jun 5
Barry Holzsweig posted a discussion
May 29
Profile Iconoliver mortagne and Heman Kidd joined HODINFO
May 27
Profile IconCharlesblake and John wilson joined HODINFO
May 21
Profile IconJustin and Dick Bos joined HODINFO
May 1
Robert Sacra favorited gabet123's discussion Catalytic Carbon PR11 Press Release new concepts and ACE cell.
Apr 28
Dave Brightman replied to gabet123's discussion 'Catalytic Carbon PR11 Press Release new concepts and ACE cell.'
Apr 28
Jim Mitchell commented on Ed Grimm's event 'Ed Grimm'
Apr 28
Jim Mitchell is attending Ed Grimm's event

Ed Grimm at Clearwater, Florida

October 18, 2019 at 12pm to October 20, 2019 at 8pm
Apr 28

© 2019   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat