Anti-Alternator Research Group


Anti-Alternator Research Group

Research in alternative electrical generating methods to power HHO fuel cells and their effects. Making HHO independent of the alternator.

Location: Charlotte NC
Members: 17
Latest Activity: Oct 6, 2017

Discussion Forum

This group does not have any discussions yet.

Comment Wall


You need to be a member of Anti-Alternator Research Group to add comments!

Comment by Daniel Donatelli Secure Supplies on July 14, 2014 at 6:29am

Hello , Nice Group, I want to draw your Attention to several things have 

1 Stan Meyer Circuits for Bench top unit wet cell Original Spec with Chokes Done

   www.irondmax.com forum  tellem Dan invited you

2 Fuel Line Live Monitor to 3g along with Engine Vitals live and Cloud Management platform Done and Available. 

3 ECu to unlock the car full potential and android tablet tuning DONE

4 Quality Split gas Cell 24 4 amp runs 24 hrs Done connect to ECU. 

I am Looking to expand Country Dealer /resellers and Installer partner at this time

I invite professionals in Business to contact me directly to discuss. 



Comment by Matthew Bhagwandass on May 2, 2011 at 6:17pm
Hey Ehnriko cool build on getting  electric power from an ICE by using heatsinks an Gabet cool weblink wish I can get my hands on 1 of those !! Thanks
Comment by KRIZZ CHANTJIRAPORN on April 20, 2010 at 9:02pm
Please accept me to the group.
But I am only a layman... curious to learn
not technically knowledgable or have the experiments to contribute yet.
Maybe after I have more knowledge and experience, I can certainly contribute.
Comment by moe on February 21, 2010 at 6:49pm
Just to keep you posted on what i am doing. I am currently back from overseas and decided there is no place like home. As far as TEG's go, i am now in school getting my degree in HVAC. I have not told anyone of my history hobby there but i am constantly thinking about improvements and new ideas. Right now I am looking how refrigeration systems could dramatically help this type of system.
Comment by Thomas Tschoepke Soares on February 21, 2010 at 8:12am
One suggestion to discuss here:
this is a motor but the principle could be used to create a generator... It has some similarities with the Bedini principle to deal with coils...
Comment by gabet123 on February 21, 2010 at 5:31am
Looks like GM is taking notes. http://www.physorg.com/news137649222.html
Comment by ehnriko on July 11, 2009 at 3:50am
Thanks a lot MOE!... The heat sink is really the key to get a good temp. differential.
Comment by moe on July 5, 2009 at 5:24am
Ehnriko that is a good attempt. I will save you a lot of pain and frustration on this experiment.

On the average peltier that you can purchase off of ebay you should be able to get between 2v and 3v with around a 100-300f delta off each plate. If you look around you will find few companies that sell specialized power generating peltiers that will put out more power. True generating peltiers will cost a lot more. Be cautious of the ones on ebay that say power generating peltier because they are no different than regular ones, only difference is they have higher heat resistant silicon seals.

Do not bother strapping them to the exhaust with out some sort of platform to distribute the heat to the peltier. The ENTIRE surface of each peltier MUST have contact heat and full contact cooling on the other side. This is one of the most important tips. If you simply try to mount a peltier on the exhaust with minimum contact (from the curve of the exhaust pipe) you will gain less then 10% of the power you can achieve if you were to disperse the heat.

Second, you can improve on the output by changing the heatsinks. Heatsinks make a huge difference. The heat sink you seem to be using are only good for open air with no forced air. You will need one where the air being forced through will give you the optimum cooling, and these include lots of fins. The thinner the fins the better. You can find excellent heat sinks here https://www.micforg.co.jp/en/index.html . It took me a while to find good heat sinks. This website has the best and they come in all shapes and sizes that will be perfect for any peltier project.

Careful with the peltiers, they will fracture easy. A tiny crack and they are done for. After mounted with heat sink and platform they will take some good punishment. Hopefully I can answer any questions you have on this subject. Enjoy and good luck.
Comment by ehnriko on July 5, 2009 at 2:59am
Here's my attempt to get power from peltier plates... out of a small moped.

still need more work... perhaps more plates and heat sinks.
Comment by moe on July 4, 2009 at 3:12am
I have changed the group from TEG RD to Anti-Alternator RD. This should broaden the scale and invite more ideas.

Members (17)


*** Translate HODINFO ***

© 2019   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat