HODINFO is a collaborative think tank. We are an International group comprised of inventors, scientist, mechanics, tinkerers, fabricators, and out of the box thinkers. Our mission is to find innovative solutions to the problems that primarily limit the production and delivery of H2. As the world wakes up to the idea of using hydrogen it also becomes clear that immense infrastructure initiatives will be required to make it happen. If adequate solutions can be found to support HOD systems then the world can remove great and costly limitations on future applications. It is important to realize that the future is not just Hydrogen, it's Hydrogen-on-Demand.

Martin Moore
  • Male
  • Essex
  • United Kingdom
Share

Martin Moore's Friends

  • Khalid Mir
  • Hans Peter GROTE
  • Barry Holzsweig
  • Todd Miller
  • don

Martin Moore's Groups

Martin Moore's Discussions

Proton Exchange Membrane - DIY / Home Made?

Started this discussion. Last reply by gabet123 Dec 3, 2015. 11 Replies

This is a serious question...Does anyone know how to construct, or can anyone say how/where to obtain a relatively low cost membrane that will operate around 100'C.There are a lot of very talented…Continue

Ultrasonics and HHO

Started this discussion. Last reply by B Mutia Aug 26, 2012. 16 Replies

I am just wondering if any colleagues have experimented with using ultrasonic energy on their cell constructions.I have been experimenting with a small system and it seems to excite the plates /…Continue

 

Martin Moore's Page

Latest Activity

Martin Moore commented on charles ware's blog post 'more work on test bed'
"Yes of course I should have been a little more specific. I meant the ignition spark and injection where used. I know an experimenter who moved up in scale was making HHO systems for BIG diesels and ships and who designed his own engine management…"
Oct 13, 2016
Martin Moore replied to Mike Walsh's discussion 'The secrets of Stanley Meyer'
"Yes Gabe... An interesting paper indeed. If resonance is the key then there are a number of designs for LC type arrangements that are self resonant and will self adjust (within reason) to maintain peak resonance. A little negative feedback makes…"
Oct 3, 2016
Martin Moore replied to Bill Nash's discussion 'HHO systems working with modern day engines (ECUs)'
"Now that is interesting. I never knew that. I've often noticed that the engine runs better if it is foggy but never really thought much about it. Thanks for that. Martin"
Oct 2, 2016
Martin Moore replied to Bill Nash's discussion 'HHO systems working with modern day engines (ECUs)'
"One of the problems that could occur with tricking the ECU into thinking that the mixture is too rich is that it actually reduces the mixture too far towards being lean.  Running an overly lean mixture will run hotter and, unless the engine is…"
Oct 2, 2016
Martin Moore replied to Bill Nash's discussion 'HHO systems working with modern day engines (ECUs)'
"Spot on Gabe... you hit the nail on the head and a better explanation than I posted. By the way... I've not bee called "Mr Moore" since I retired - it looks so funny now."
Oct 1, 2016
Martin Moore replied to Bill Nash's discussion 'HHO systems working with modern day engines (ECUs)'
"That is interesting. I suspect that others may be able to throw more light on the topic but I think that the additional Oxygen in the H2 is fooling the ECU to think that it needs to add fuel to balance the mixture. There may be an easier way to go…"
Oct 1, 2016
Martin Moore replied to Dan Moore's discussion 'For vehical with a hard to crack ecm'
"Hummmm... Does not the EGR valve do something linked to this. It recycles exhaust gasses back through the intake. You might be able to physically engineer something here. You might also look to do something like using a spacer at the O2 sensor to…"
Sep 8, 2016
Martin Moore replied to gabet123's discussion 'PCB123'
"Without delving too quick too fast.... can it read Eagle files?"
Sep 7, 2016
Martin Moore commented on charles ware's blog post 'more work on test bed'
"That is an interesting engineering project. I wonder, have you had to , or are you going to, experiment with changing the timing of the engine at all? Sorry if you have already covered this point elsewhere but I've only just read your post."
Sep 6, 2016
Martin Moore replied to Alexander's discussion '2 stroke outboarder'
"Never tried this but it is an interesting proposition. I know how two strokes work and I'm wondering just how HHO would fare within the engine cavity. I'm talking about the big-end and flywheel area. Normally this is lubricated by the…"
Sep 2, 2016
Martin Moore replied to gabet123's discussion 'Now you can buy Catalytic Carbon'
"Catalytic Carbon has a surface activation process that changes the surface of the material. It does not change the core of the carbon. The catalysing process can be applied to carbon in all its raw forms including coke, anthracite, graphite and…"
Jun 20, 2016
Martin Moore replied to gabet123's discussion 'Catalytic Carbon PR11 Press Release new concepts and ACE cell.'
"Carb engines, for motor vehicles, are becoming a thing of the past now and so the question of a flashback has become dramatically reduced over the years. I am a big fan of directly injected H2 as a solution in that is can be easily…"
Jan 7, 2016
Martin Moore replied to gabet123's discussion 'Catalytic Carbon PR11 Press Release new concepts and ACE cell.'
"That's interesting/ I like the idea of "shut down" but I wonder what it does for balance and vibration? In looks - it reminds me of a little engine we used to have in a car nearly 45 years ago!"
Jan 7, 2016
Martin Moore replied to gabet123's discussion 'Catalytic Carbon PR11 Press Release new concepts and ACE cell.'
"How about direct injection of H2 into the cylinder? H2 would not therefore be mixed with O or air anywhere except within an area built for ignition. Has anyone considered H2 enriched (think emulsion) diesel at the injectors? Is there room for a high…"
Jan 4, 2016
Martin Moore posted a status
"Looking to send Sodium ions through PEM material to a water bath."
Dec 6, 2015
Martin Moore left a comment for Charles Phillips
"Hi Charles. Thanks for coming back so quickly. Let me explain. I want to use a sodium based solution (either sodium chloride or sodium carbonate) and encourage sodium ions to pass from the sodium based solution through the membrane to a water…"
Dec 3, 2015

Profile Information

What is your HOD level of experience?
Novice Builder
What is your Skype ID? Skype it is free and recommended. http://skype.com
martin.c.moore
What do you do for a living or have special education in?
Well I used to be a director of systems & planning at an adult education college in London - England. Now I am retired and I'm having a wonderful time with my electronics and engineering.
Is there anything else you would like to add?
This is so exciting... to be part of the future - no matter how minor.

Martin Moore's Blog

Hydroxyl.... OH... Wanted - need to bind Hydroxyl

Posted on April 6, 2014 at 8:30am 4 Comments

Wanted: Hydroxyl binder...

Someone somewhere may know the answer to this little problem. We need to tie up/bind Hydroxly (OH) with something really fast. It also needs to be dirt cheap.

Aluminium works, so does magnesium but both are relatively expensive and more than a little dangerous in a powder format.

Is there an organic substance / process…

Continue

Wanted - PTFE mesh

Posted on October 9, 2011 at 11:26am 1 Comment

Dear Colleagues,

Does anyone know of a source of PTFE mesh?  I am looking for something that has a hole size or around 1.5 to 1mm or less (probably not less that .5mm though).  I suppose it could be knitted (I don't think my mother could do it though lol!). I estimate that I need about 1000mm X 500mm in total.

A UK source would be good but of course I can buy from anywhere - it just takes a bit longer.

Any help or advice on leads would be…

Continue

Comment Wall (2 comments)

You need to be a member of HODINFO to add comments!

Join HODINFO

At 11:05pm on December 2, 2015, Charles Phillips said…
Got an email about some interest in a pem cell? I have some experience with them
At 11:35am on November 12, 2011, Unca RaF said…

Greetings,

   My name is Ralph Gugar from "North Coast Flow Testing Lab", and I'm also one of the founding members of the "International HHO Institute" (IHHOI). It has been brought to my attention through HHOINFO that you may have interest in having an HHO cell, flow tested. I'm sorry that someone from the IHHOI has not contacted previously, but there must be a glitch in the system from when someone requests info by clicking on the IHHOI link on HHOINFO.

   Please feel free to go directly to the IHHOI website at: "IHHOI.org" and you can learn exactly what the IHHOI is all about, from becoming a member, to HHO cell testing and how to place an order for a cell test, and to their vision of what they plan to accomplish:

  • To be the premier authority and open source of information for the
    discovery, development, and advancement of sustainable, renewable energy
    sources.
  • To promote HHO as a viable, sustainable, alternative energy.
  • To help reduce our dependence on foreign and domestic oil companies and our
    dependence on polluting, petroleum based-fossil fuels.
  • To provide standards for Quality, Safety, Installation, and Integrity
    solutions to meet the needs of its members.
  • Further, with the goal of becoming recognized as the “UL” for the HHO
    industry providing product registration and product performance certification.
 
 
 

*** Translate HODINFO ***

Archive this page

Latest Activity

charles ware replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 16
charles ware replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 15
anthony a grisanti left a comment for Anthony Preston
Jul 15
broandrew replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 13
phil updated their profile
Jul 12
Jeremy Dukes favorited broandrew's discussion TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking
Jul 11
Jeremy Dukes replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 11
broandrew posted a discussion
Jul 8
Mark Vincent replied to Mark Vincent's discussion 'New to the forum and HHO systems'
Jul 4
gabet123 replied to gabet123's discussion 'Spammer Alert'
Jul 4
Jeremy Dukes replied to Felix Audet's discussion 'Corrosion and Circulating HHO cells'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
A discussion started by gabet123 was featured
Jun 24

© 2017   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat