HODINFO is a collaborative think tank. We are an International group comprised of inventors, scientist, mechanics, tinkerers, fabricators, and out of the box thinkers. Our mission is to find innovative solutions to the problems that primarily limit the production and delivery of H2. As the world wakes up to the idea of using hydrogen it also becomes clear that immense infrastructure initiatives will be required to make it happen. If adequate solutions can be found to support HOD systems then the world can remove great and costly limitations on future applications. It is important to realize that the future is not just Hydrogen, it's Hydrogen-on-Demand.

Richard Collins
  • Male
  • Cincinnati, OH
  • United States
Share

Richard Collins's Friends

  • jim miiller
  • Elbert Dugdale
  • Todd Miller
  • David Bixler
  • Chance Bouffard
  • Phillip Jackson
  • Leandro Rache
  • Joselito Sapinoso
  • Stephen Marshall
  • Marin Marinov
  • Gregory William Rogers
  • Terrell
  • Ashok Bagaria
  • NET
  • Robin Dunham

Richard Collins's Discussions

I created a circuit where Voltage climbs to infinity accross the capacitor on the Circuit Simulator.

Started this discussion. Last reply by gabet123 Sep 28, 2010. 1 Reply

Thank you so very much for the Circuit Simulator. Here is a gift from meto everyone. Watch the 12V Square Wave @ 21.63475khz it takes thevoltage felt at the 100pf capacitor to 5.06 MILLION…Continue

Tags: circuit, intensification, voltage

California HHO Lab Explosion

Started this discussion. Last reply by gabet123 Sep 22, 2010. 5 Replies

After reading about this unfortunate event I couldn't help but notice the first comment following the article and I must say it was rather offending in nature if you ask me. So in response to this…Continue

The license agreement grants American Hydrogen, a wholly owned subsidiary of American Security Resources Corp. (OTCBB: ARSC), exclusive worldwide rights to commercialize the technology.

Started this discussion. Last reply by Stephen Paciorek Mar 8, 2013. 3 Replies

Thecompany, American Hydrogen Corp., also has set up offices in Athens atthe Ohio University Innovation Center. The license agreement grantsAmerican Hydrogen, a wholly owned subsidiary of American…Continue

History repeats itself... Tesla, Keely, Bedini, Meyer, Kanzius... I missed a few but who is counting and who is next?

Started this discussion. Last reply by Gary May 31, 2010. 4 Replies

Interesting article below. I just wanted to share it with all of you. It just shows how history repeats itself and how resistance to free energy, perpetual devices, ect is nothing new. We are…Continue

 

Please Join "Meyer Research Group"

Latest Activity

gabet123 left a comment for Richard Collins
"I think it needs to be done. Let me know if you need help with anything."
Dec 5, 2014
Stephen Paciorek replied to Richard Collins's discussion 'The license agreement grants American Hydrogen, a wholly owned subsidiary of American Security Resources Corp. (OTCBB: ARSC), exclusive worldwide rights to commercialize the technology.'
"Further more, Main article: Anti-competitive practices A distinction between single-firm and multi-firm conduct is fundamental to the structure of U.S. antitrust law, which, as noted antitrust scholar Phillip Areeda has pointed out, "contains a…"
Mar 8, 2013
Stephen Paciorek replied to Richard Collins's discussion 'The license agreement grants American Hydrogen, a wholly owned subsidiary of American Security Resources Corp. (OTCBB: ARSC), exclusive worldwide rights to commercialize the technology.'
" not only is this imoral, but illegal and unjust to the small bussinesses.  See below, The United States antitrust laws were put in place by federal and state governments to regulate corporations. They are believed to be necessary for…"
Mar 8, 2013
Stephen Paciorek replied to Richard Collins's discussion 'The license agreement grants American Hydrogen, a wholly owned subsidiary of American Security Resources Corp. (OTCBB: ARSC), exclusive worldwide rights to commercialize the technology.'
"This is what helps make America grow,,,,pay offs for exclusive world wide rights, this helps others to be motivated to research this avenue!  What commision (payoff) issued this?????????????????????"
Mar 8, 2013
Richard Collins replied to Richard Collins's discussion 'Stanley Allen Meyer Patent Collection Database' in the group Meyer Research Group
"ZIP FILE OF ALL STAN MEYER PATENTS"
Apr 28, 2012
Richard Collins replied to David Bixler's discussion 'Pictures of Stan's stuff' in the group Meyer Research Group
Apr 28, 2012
Richard Collins commented on gabet123's group 'Meyer Research Group'
Apr 28, 2012
Richard Collins and jim miiller are now friends
Jan 30, 2012
gabet123 left a comment for Richard Collins
"Your interaction number 85"
Jan 19, 2012
Joe Shea and Richard Collins are now friends
Dec 6, 2011
Lee Cheng replied to Richard Collins's discussion 'Stanley Allen Meyer Patent Collection Database' in the group Meyer Research Group
"Although this aspect of the technology is not very understanding, but thanks for your enthusiasm and selfless efforts. Good Luck Cheers/"
May 20, 2011
Richard Collins favorited David Bixler's profile
May 4, 2011
Richard Collins replied to David Bixler's discussion 'Pictures of Stan's stuff' in the group Meyer Research Group
"Also see Daves most recent photos on his profile, he has some of the best photos I have even seen of Meyers equipment."
May 4, 2011
Richard Collins favorited gabet123's group Meyer Research Group
Apr 24, 2011
Richard Collins replied to Richard Collins's discussion 'C.A.D. Drawings of Meyer Replication Project' in the group Meyer Research Group
"Hello Robin Dunham, the CAD drawings were just an effort to document Meyers device in order for better understanding of its construction. The efforts abruptly ceased a few months ago when my lack of patience got the best of me and I Frisbee tossed…"
Apr 22, 2011
Richard Collins favorited David Bixler's discussion Pictures of Stan's stuff
Apr 22, 2011
Richard Collins replied to David Bixler's discussion 'Pictures of Stan's stuff' in the group Meyer Research Group
"Thank You. Not to often do I see new Meyer pictures. Nice find. I seen this particular vic but the picture was much smaller and a different angle."
Apr 22, 2011
Richard Collins favorited Spodie Odie's profile
Apr 22, 2011

Profile Information

What is your HOD level of experience?
Intermediate Builder
Do you have a website about HOD technology? Please link to HODINFO also!
http://hellohydrogen.webs.com/
What is your Skype ID? Skype it is free and recommended. http://skype.com
Skype
Is there anything else you would like to add?
Read the book by Masaru Emoto called The Healing Power of Water. ISBN 978-1-4019-0877-5 (Paper Back) or ISBN 978-1-4019-0876-8 (Hard Cover)

Richard Collins's Blog

More details of the unit in the pictures

Posted on May 4, 2010 at 9:05pm 0 Comments

Thank You for your interests in the device I built. I am sorry but I do not have the necessary equipment (Hydrogen safe flow gauge) to meter any devices. If I had more equipment I could provide accurate specifications for this device. Such as; Hydrogen-Hydrogen-Oxygen output in litres/minute at different DC potentials measured in Volts and currents measured in Amps. I can measure the consumption of the device just not the production of the device. My device simply creates Hydrogen and Oxygen by… Continue

Concerns for Storing HHO

Posted on April 24, 2010 at 3:24am 4 Comments

I have an Aluminum CO2 Storage Tank. What are some safety guidelines for using it to store HHO? It is not wrapped in Carbon Fiber. What would be a safe PSI range for storage of HHO be if any? I understand that I would have to avoid getting water vapor in the tank. I also understand that the rate in which the hydrogen is released from the tank needs to be regulated in order to avoid self ignition of the gas due to friction with the surrounding ambient air. What anti flashback… Continue

Comment Wall (13 comments)

You need to be a member of HODINFO to add comments!

Join HODINFO

At 8:15am on December 5, 2014, gabet123 said…

I think it needs to be done. Let me know if you need help with anything.

At 9:26pm on March 22, 2011, Gerald Rowley said…
I am a researcher myself.  Have been researching ICE's for over 20 years.  Recently been focusing on diesel engines.  If you or anyone in the South Florida area has medium or heavy duty diesel trucks would be interested in adding Maximo-Diesel pre-heaters to help on mileage contact me.  Can send e-mail to info@bestdieselsolutions.com
At 11:07pm on December 3, 2010, Zolar said…
Well, I have type 2 diabetes. Rapid weight loss, dizziness, memory loss, and other problems.

Having some unaccounted for periods of time and problems with judgment.

Otherwise, trying to survive in these poor economic times.

How about you?
At 10:49am on November 29, 2010, Phillip Jackson said…
As you must know your producing Hydrogen with a HHO system but your also producing oxygen. When both are mixed together like this, well your just asking for an explosion. Its almost like saying: What kind of container will hold TNT.
At 7:46am on November 24, 2010, Andy Carroll said…
Ouch thats an expensiv glass leak to fix, you must have bin pissed off. Do you use a Manhatten to USB rescue hard drives, or do you have one of those nifty little USB hard drive cables?
At 8:01pm on November 1, 2010, David Bixler said…
Hello Richard, i've just joined the Stan Meyer group, I havent seen your youtube page yet but i will over the next few day. Anyway Gabit123 told me to say whats up, i read some of your profile and it sounds like we're working on some of the same stuff.
At 1:21am on October 29, 2010, Joselito Sapinoso said…
Hi Richard. I am using a trial version of 3d studio max 10. I started learning the program since 3d studio max 5. Self taught so I really do not have a wide grasp of the program. These animations I made are simple movements. No INVERSE KINEMATICS nor MORPHING. everything is in 3d space without relation to one another, meaning no interactive surfaces colliding. So basically, I have a very shallow knowledge of this program. I would be happy to learn them though, but with self teaching, it is quite very difficult.

I don't know how I can help you learn this program, but I'll try. Buy the program or search for some cracked installers of the trial version.

Thanks
At 7:59am on September 29, 2010, CHARLES E said…
Thanks for the Invite Iam happy to join and be a part of this group, hope to learn alot and apply it. My knowlage is limited so I cant contribit much. THANKS.
At 11:39pm on September 28, 2010, Peter Kiproff said…
Hi Richard, glad to join the Meyers group, If we all work together & join forces
maybe we can run on water.
At 3:26am on May 2, 2010, gabet123 said…
Thanks for your input. I had a donation button up and running for about 9 months. We had exactly ZERO donations. I tried banner ads which Ning makes you pay for in order to run them on your network. We made money for about 2 months out of 6 so it was suspended. I agree I would like to keep it free and if I have to charge to keep it going I will be sorry to see you go. I did the poll in order to see what people thought about the idea of paying because I am not sure what Ning is going to do on the fourth. They might make it where we have to pay to acces Ning period as users and as creators. It might be totaly out of my control. Thanks for the suggestions. I have been working in the background for a while now to try and find a good solution.
 
 
 

*** Translate HODINFO ***

Archive this page

Latest Activity

charles ware replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 16
charles ware replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 15
anthony a grisanti left a comment for Anthony Preston
Jul 15
broandrew replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 13
phil updated their profile
Jul 12
Jeremy Dukes favorited broandrew's discussion TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking
Jul 11
Jeremy Dukes replied to broandrew's discussion 'TESLA TECH CONFERENCE SCHEDULE JULY 2017 - Bob will be speaking'
Jul 11
broandrew posted a discussion
Jul 8
Mark Vincent replied to Mark Vincent's discussion 'New to the forum and HHO systems'
Jul 4
gabet123 replied to gabet123's discussion 'Spammer Alert'
Jul 4
Jeremy Dukes replied to Felix Audet's discussion 'Corrosion and Circulating HHO cells'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
gabet123 replied to gabet123's discussion 'Phillips Company/ Howard Phillips/ Catalytic Carbon Data Archive'
Jun 25
A discussion started by gabet123 was featured
Jun 24

© 2017   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat