Use Platinum plated titanium or MMO coated titanium sheet or mesh as anodes and try the out put. It will give you high pure HHO output and it will not damage the electgrolyte. Refer the site www.tianode.com for the anode plates.
I allready finish my dry cell with is 11 plate, 4 neutral, 2 cells. I use NaOH 100 miligrams and 800cc of water. I am using a PC power supply at 12 volts, but I only get 5 or 6 amps front de power supply, it´s indicated that the max output power is 20 amps. Other thing is that the water turns red or brown, I had disassemble the cell twice and wash it with sandpaper, put together again and running, but again the water turs red. I am using 304ss, the cell is 14 cm X 14 cm, using O-rings of 4". The separation between each plate is about 1,5 mm.
Thank you very much...
Hello. I am building a dry cell, it is my first. I have a doubt. I see you talking about 13 plate cell and other people said 11 plate cell for a car alternator. What do you have experimented about this issue. 11 plate = 4 neutral 2 cells o 13 plate = 5 neutral 2 cell? Thanks for all information.
WARNING: THE DEVICES ON THIS WEBSITE CAN CAUSE PROPERTY DAMAGE AND POTENTIALLY CAUSE BODILY HARM OR EVEN DEATH. IF YOU ARE A MINOR STOP AND GET ADULT SUPERVISION. IF YOU ARE UNSURE ABOUT ANYTHING ASK SOMEONE WHO KNOWS THE ANSWER FIRST. THIS SITE IS HERE TO HELP PEOPLE BE SAFE, NOT TO ENCOURAGE RECKLESS BEHAVIOR. IF YOU DECIDE TO BUILD OR USE A DEVICE YOU SEE ON THIS WEBSITE OR ANY WEBSITE WE LINK TO YOU DO IT AT YOUR OWN RISK. PLEASE TAKE ALL SAFETY PRECAUTIONS. PLEASE READ THE TERMS OF SERVICE.