Skysabre's Comments

Comment Wall (14 comments)

You need to be a member of HODINFO to add comments!

Join HODINFO

At 12:07am on July 5, 2010, Velappan Jeyakummar said…
Dear All,

Use Platinum plated titanium or MMO coated titanium sheet or mesh as anodes and try the out put. It will give you high pure HHO output and it will not damage the electgrolyte. Refer the site www.tianode.com for the anode plates.

Reg.,
JK
At 12:33pm on June 10, 2010, Juan José Hernández Jirón said…
Thank you Skyabre. I will notice you how I am progressing. I wil add one neutral plate and use more NaOH.
At 12:54pm on June 9, 2010, Juan José Hernández Jirón said…
Hello Skyabre
I allready finish my dry cell with is 11 plate, 4 neutral, 2 cells. I use NaOH 100 miligrams and 800cc of water. I am using a PC power supply at 12 volts, but I only get 5 or 6 amps front de power supply, it´s indicated that the max output power is 20 amps. Other thing is that the water turns red or brown, I had disassemble the cell twice and wash it with sandpaper, put together again and running, but again the water turs red. I am using 304ss, the cell is 14 cm X 14 cm, using O-rings of 4". The separation between each plate is about 1,5 mm.
Thank you very much...
At 5:29pm on May 31, 2010, Juan José Hernández Jirón said…
What electrolytic are you using? Have you tried vinegar?
At 1:44pm on May 26, 2010, Juan José Hernández Jirón said…
Hello. I am building a dry cell, it is my first. I have a doubt. I see you talking about 13 plate cell and other people said 11 plate cell for a car alternator. What do you have experimented about this issue. 11 plate = 4 neutral 2 cells o 13 plate = 5 neutral 2 cell? Thanks for all information.
At 11:33am on May 1, 2010, Andy Carroll said…
I was wondering if it could be used on my spiral cell as end plates, and will it adhear to 316L as it is curing.
At 12:28am on April 27, 2010, Andy Carroll said…
Hey sky weren't you using a resin process to make cell dividers?
At 10:38am on April 10, 2010, Peter Kiproff said…
Skysabre
I hope we can make more than sparks " Plasma "
Peter
At 8:08pm on March 20, 2010, gabet123 said…
That looks pretty good I think I will send it out to the members. Then we can create our own nd do it again.
At 5:50am on January 7, 2010, skysabre said…
Hi Jack,

I've sent you email.
At 4:49am on January 7, 2010, Jack Vines said…
Skysabre, I have been following your work on combining hho generator and water vapor system. my question is more on the use of making a casting and using the casting as a chamber to control the amount of hho gas into the intake manifold. The ping pong ball idea would work as a control valve. I would like to talk to you about my idea, my e mail address is jack_elaine@hughes.net looking to hear from you.
Jack
At 6:57pm on November 17, 2009, gabet123 said…
OK The reason they got rid of the last reply is because they replaced it with the last button. So in order to find the last reply just scroll down to the bottom of the first page and hit LAST. That should solve the issue.
At 8:19am on November 12, 2009, gabet123 said…
I submitted a ticket to Ning over the issue.
At 7:35am on October 1, 2009, Joe Shea said…
I thnk a a possibole new direction for the site could be simplification. There is a great deal being accomplished, yet it has become rather complex. I think there's a potential need for reducing the goals of the site and presenting the very useful chat box along with the most exciting current info and then reduce the number of links at top to a manageable number - manageable by us, I mean! This is a wonderful site,

*** Translate HODINFO ***

Latest Activity

Meryn Mckenzie is now a member of HODINFO
yesterday
Jim Mitchell commented on Jim Mitchell's blog post 'Electronysis a Spectacular new Vernacular page 2'
Sep 14
gabet123 replied to gabet123's discussion 'Spammer Alert'
Sep 14
Jeremy Dukes commented on Jim Mitchell's blog post 'Electronysis a Spectacular new Vernacular page 2'
Sep 13
Jeremy Dukes favorited Jim Mitchell's blog post Electronysis a Spectacular new Vernacular page 2
Sep 10
Jeremy Dukes favorited Jim Mitchell's blog post Electronysis a Spectacular new Vernacular page 2
Sep 10
Jim Mitchell commented on Jim Mitchell's blog post 'Electronysis a Spectacular new Vernacular page 2'
Sep 10
Jeremy Dukes commented on Jim Mitchell's blog post 'Electronysis a Spectacular new Vernacular page 2'
Sep 9
Jim Mitchell posted a blog post
Sep 9
Jeremy Dukes commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 7
Jaco Bezuidenhout commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 7
Jim Mitchell commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 6
Jim Mitchell commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 6
Jim Mitchell commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 6
Jaco Bezuidenhout commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 6
Jeremy Dukes commented on Jim Mitchell's blog post 'Electronyisis A Spectacular New Vernacular.'
Sep 5

© 2018   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat