HODINFO is a collaborative think tank/ open science initiative. We are an International group comprised of inventors, scientist, mechanics, tinkerers, fabricators, and out of the box thinkers. Our mission is to find innovative solutions to the problems that primarily limit the production and delivery of H2. As the world starts using hydrogen it becomes clear that immense infrastructure initiatives will be required to make it happen. If adequate solutions can be found to support Hydrogen-On-Demand (HOD) systems then the world can remove great and costly limitations on future applications. The future is not just Hydrogen, it's Hydrogen-on-Demand.

Gabet123's Comments

Comment Wall (230 comments)

You need to be a member of HODINFO to add comments!

Join HODINFO

At 11:48pm on January 31, 2018, moldoveanu.marius said…

Hello.  I need to talk with you. Since is not easy for me to stay online out of Chinese firewall please send me a message on moldoveanu.marius @qq.com 

At 12:25pm on November 10, 2017, Ocean said…

Thanks!

At 2:51pm on March 12, 2017, richard r may said…

my experimental car has rotary engine 430 HP turbo rebuilt 5 times spending most of time  trying to make reliable ,hoping to get back to HHO see you soon

At 2:53pm on August 8, 2016, Gustavo Godoy said…

Dear experts,

I would like to request you information about companies with experience in Brown gas electrolyzers for industrials applictions. We are looking for generators over 10-15m3/h production, especially located in USA and Canada.

Best Regards,

At 7:00pm on November 15, 2015,
HODINFO SPONSOR
Peter Jasprizza
said…

I do not have a link.

I am seeking private funding, not public funding.

Thanks,

At 10:47am on February 17, 2015, Akdadoc said…
yes Forgot to respond
At 1:20am on December 5, 2014, nalin.ajith.sooriyabandara said…

Hi !! Gabet123 ! i am still alive, so whats new? FF up with politics and some bullshit, wait i am going to open new lab for hho practice in sri lanka... 

At 3:48pm on October 18, 2014, Gordon Babcock said…

Hey Gabet I left pictures of my cell with ask an expert. As well as an idea of how to over come my problem. Please have a look if you have time? Your suggestions will taken seriously because I've never had this much production of gas and water vapor before. Two 3/8's lines manifolded together don't allow what I think is the right flow out of the cell.  

At 10:07pm on October 9, 2014, Richard Collins said…

What are your thoughts on a documentary about the HHO world and everyones findings Gabe? I have the ability to shoot it in 4k.

At 10:32am on September 22, 2014, Dave Patterson said…

Thanks

At 1:23pm on September 17, 2013, Glenn P DeRosa said…

Thank you for the heads up on the passing of Denny Klein. Truly a great innovator and inspiration. He and Stan Meyers have been largely responsible for the modern day HHO movement. He will be missed!

Glenn

772 409 6000

At 1:49pm on September 27, 2012, Tim Huttner said…

gabet123 hi and thankyou for the post.. how do i get this info out the group ? can u assist? thank you Tim Huttner.. 

At 11:53am on September 8, 2012, Batmat said…

I have used the technology of Brown in my car for over 3 years and I continue to search for the improvement of this technology. Before using was not aware of this technology and when I had access here and on other websites, I've been learning more and more and more evolving. My car in condition of gasoline makes 9 km / L in city center and 17 km / L on the road (since no more than 80 km / h, otherwise it just does exceed this speed 14km / L). With the technology of HHO in the urban center is 20-21km / L on the highway and 30-34 km / L (using abusing the speed to 100km / h). The car is the GM - EFI - 1.0 -1994 - mono point and a beak. The video is now posted here some time ago.

At 8:50am on August 15, 2012, scott wainwright said…

Thank you for the warm welcome. I am excited about this topic and look forward to good discussions on here.

At 1:30pm on February 21, 2012, Zolar said…

Thanks my friend. I am going through some really tough and trying times right now. We will most likely be going to court over our landlord and safety issues he refuses to take care of. He also poisoned our son with lead dust.

Right now I am very sick. Been really sick for at least a week. Just started antibiotics a few minutes ago. Once we finish the legal issues over our landlord we should be in a better position to try and make a donation. But with the court system the way it is you can never tell how long that is going to be. He is under investigation by Region 5 of the USEPA for serious lead paint violations. This is in addition to other issues we have with him.

I really appreciate your reinstating my access.

Also, I talked to a guy that personally knew Stan Meyers. He said Stan was an innovator and too bad he passed away. I wish the guy was smart enough to pick Stan's brains instead of being a drinking buddy - LOL

Many thanks!

Zolar/Chuck

At 7:01pm on January 4, 2012, Gary said…

That makes me officially OLD, right? Thanx G.

At 3:18pm on December 31, 2011, Zero said…

Thank you. I will be posting more HHO updates and data here in the coming months once I have time to finish reassembling my "Batt-cell" with the plates Larry (aka HHOPWR) media blasted for me. The plan is to test it along with the Square1 SIC and then install on the 2010 v8 Chevy Sierra my employer has given me to drive. Average MPG is only ~14.5. Best recorded MPG 15.8. Can't even begin to tell you how much I HATE driving a gas guzzler like this. Not to mention what a piece of CRAP this truck is. Had no idea how spoiled I was with my v6 Tacoma until I was forced to trade it in for another lease vehicle. But that's a rant for another day.

Happy New Year!

Z

At 11:59pm on November 24, 2011, Chase Thomson said…

Hi Gabet123, Thanks for the reminder that I only have 0 interactions. I am really new to this and would like to learn before going about saying stupid things. But don't worry in my own time I will begin with the contributions,I just have to get my thought in order. take care

 

At 4:32pm on November 16, 2011, Bo DuBose said…

Hey G Man,

The website is getting better every day because of your God given abilities, passionately put to service. Keep it up!!

 

See you at the top!

Bo

At 2:07pm on October 29, 2011, Barry Holzsweig said…

Gabe,

Thanks for the update on ads. Do you have a way to place banner ads without the PPC charges? Our web designer says there's  no way to control who clicks on the banner and it could end up costing us hundreds of dollars a month for nothing. Is there a high end limit on the PPC charges? e.g. if someone clicks on the banner 300 times in one month, would that cost $150.00? Would there be a limit on how much is charged per month?

We would much rather purchase a space for our banner ad on a per month fee.

 

Barry Holzsweig

*** Translate HODINFO ***

Latest Activity

Felix Audet replied to Felix Audet's discussion 'HV + DC electrolysis'
Monday
David Brightman posted a status
"Currently getting set to build an ACE2 type cell.I could not find any cast iron pipe here so I found some cast iron sash weights I will"
Feb 6
David Brightman favorited gabet123's discussion Howard Phillips Ace Cell
Feb 5
Macel is now a member of HODINFO
Feb 4
Barry Holzsweig replied to Joseph Tasso's discussion 'HHO sensor?'
Feb 2
broandrew replied to Joseph Tasso's discussion 'HHO sensor?'
Feb 2
Mickey Hudson is now a member of HODINFO
Feb 2
moldoveanu.marius left a comment for gabet123
Jan 31
moldoveanu.marius posted a status
"Engine and exhaust circuit cleaning by atomized water based additives solution"
Jan 31
rodolfo berio is now a member of HODINFO
Jan 17
Barry Holzsweig posted a status
"We now have Volo EFIEs that plug into the OBD port. No wire taps necessary. Check out the pics."
Jan 14
shiyong is now a member of HODINFO
Jan 3
Jessee McBroom favorited gabet123's discussion Catalytic Carbon PR11 Press Release new concepts and ACE cell.
Jan 2
moldoveanu.marius replied to Felix Audet's discussion 'HV + DC electrolysis'
Jan 2
Barry Holzsweig replied to Felix Audet's discussion 'HV + DC electrolysis'
Jan 2
Jessee McBroom replied to gabet123's discussion 'Catalytic Carbon PR11 Press Release new concepts and ACE cell.'
Jan 2

© 2018   Created by gabet123.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

Live Chat